As an important part of the emerging two-dimensional nanomaterials , two -dimensional MXene has received extensive attention in recent years, especially in the energy-related fields. Unfortunately, due to the usual use of dangerous etchants, the controlled synthesis of MXenes with higher purity remains a challenge. I am looking forward to proposing a simple, controllable and effective method for green production of MXene .
Achievements
Recently, the Queensland University of Technology of Sunzi Qi professor and Southwest Jiaotong University ‘s Professor Hu Chunfeng in the internationally renowned journal Chemical Engineering Journal published entitled " Thermal Reduction of sulfur-containing MAX Phase for MXene Production‘s " papers. In this work, a thermal reduction strategy was innovatively proposed to prepare MXenes nanosheets from the sulfur-containing MAX phase, in which weakly bonded S atoms reacted with hydrogen to form volatile gases, leaving behind two-dimensional graphene-like Ti 2 C nanosheets. As a promising electrochemical anode material, the MXene-based lithium battery has a good initial discharge capacity, about 200 mAh g −1 . In addition, the capacity remained at 70 mAh g −1 after more than 130 cycles at 2.0 A g −1 , demonstrating good rate performance and cycle stability. Therefore, this work provides a new method for the preparation of MXene and enriches the MXene-based electrode materials for energy devices.
Figure 1 Schematic diagram of preparation of 2D Ti 2 C MXene .
Figure 2 The crystalline form after reducing the sulfur-containing MAX phase at different temperatures .
Figure 3 The morphology and structure of the sulfur-bearing MAX phase at different temperatures .
Figure 4. Morphology and structure of Ti 2 C MXene after ultrasound .
FIG 5 before and after the thermal reduction 2D of Ti 2 C MXene the XPS peak separation.
Figure 6 Electrochemical properties of 2D Ti 2 C MXene .
Figure 7 Nyquist and TEM images of 2D Ti 2 C MXene after cycling .
in conclusion
In summary, a novel method for preparing MXenes nanosheets from the sulfur-containing MAX phase through thermal reduction strategy was innovatively proposed . Experiments show that the optimal reduction temperature is 800 ℃, and the obtained MXene has a clear two-dimensional sheet structure. The prepared MXene -based lithium battery has a good initial discharge capacity, about 200 mAh g −1 . In addition, the capacity remains at 70 mAh g −1 after more than 130 cycles at 2.0 A g −1 , demonstrating good rate performance and cycle stability. This work promotes MXene the large-scale preparation and MXene industrial applications based rechargeable battery material.
Original link:
https://www.sciencedirect.com/science/article/pii/S1385894720311037
Source: MXene Academic
This information originates from the Internet for academic exchange only. If there is any infringement, please contact us to delete it immediately
